Features & Benefits

Key Features

Simultaneously measure O₂, CO, CO₂, H₂O, and temperature, in situ, in ultra-harsh environments
Measure through the combustion zone, the back-pass, or along any straight line
Up to 15 paths
Zolographic™ tomography maps combustion
SensAlign™ transmit and receive heads align automatically
ClearView™ port rodders keep paths clear of ash, dust, and slag
No probes to insert or wear out
Sensitive electronics located in the control room, remote from the boiler environment
DCS and neural net compliant

Key Benefits

Balance Temp, O₂, and CO in furnace to optimize combustion
- Reduce NO_x and CO₂
- Improve heat rate
- Reduce LOI and carbon in ash
- Reduce opacity events (derates)
- Reduce water wall wastage caused by high local O₂
Real-time measurement of FEGT
- Reduce slagging and fouling by maintaining below ash fusion temperature
- Increase plant availability by reducing forced outages or derates
- Monitor performance of superheat and reheat temperatures
Increase plant output
- Monitor excess O₂ in back-pass
- More accurate representation of O₂ distribution and concentration
- Reduce overall excess air
- Monitor for air in-leakage between furnace and back-pass

Zolo Technologies, Inc.